The date of payment from buyers deliver within days
OA500 steel floor trunk system is a low profile raised floor a continuous grid-form cable trenches separated by individual floor panel.
It is a solution where traditional raised floors are not suitable to install.
This system is especially suitable for old and new buildings with limitation in load and head room height constraint.
Load performance selections: FS800/FS1000/FS1250
Main panel, size 500x500mm steel with cement infill panel, powder coated with groove at all sides. Pedestals are secured at four corners of the panels to make it free-standing.
Base conector connects the panel pedestal at four corners and when laid out continuously will form grid-form trenches automatically.
Central cover plate-------- This is installed above the base connector securing to the corners of four panels to cover the trench intersection.
Flank cover plate------- The cable trench is closed up with flank cover plate, its long edges interlocked onto the grooves of the cover the lo9ng sides of the trench.
Low profile----- For usage where there is headroom height constraint
Low weight-----For usage where limitation in loading e.g. old building.
Flexibility----- The layout of the cable and wires are more flexible with grid-form cable trenches and can reach to any place in the office.
User friendly------ To access the trench, just lift trench cover by hand, No tool required.
Eco friendly-------- Pedestals are not glued to the ground. All components are reusable when relocating the floor system.